Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
Home
Help
Search
Calendar
Login
Register
News
: No News to Report
Southeast Ecotec Enthusiasts
>
General
>
How-To
(Moderators:
mcphatty
,
TunerTimmyo
,
braineater
) >
How To: Fix your sunroof bezel
Pages: [
1
]
« previous
next »
Print
Author
Topic: How To: Fix your sunroof bezel (Read 604 times)
0 Members and 1 Guest are viewing this topic.
mcphatty
El Presidente
Senior Member
Offline
Posts: 3066
Press the mcphatty button...
How To: Fix your sunroof bezel
«
on:
March 27, 2007, 05:17:45 PM »
I know a lot of people have been complaining about their sunroof bezels popping off, so I thought I'd make a quick write-up on how I fixed it on my car.
I had a lot of trouble getting the bezel to stay in place once I popped it back on, only having it pop back off everytime I used the sunroof. This is a little bit of a sloppy fix, but it seems to do the job, and will hold that bezel very securely.
I dont have a picture of what the clips looked like before the fix, but on the left side of the opening you'll need to flatten out the metal clips as shown in the picture below. You'll also need to flatten out the clip opposite of the one circled.
Now we need to focus on the actual bezel. Shave the outer edges of one of the clips on the bezel, and shave a little off of the grabbing part of the clip too. This will allow it to fit between the loop and the clip of the flattened metal.
From there, its easiest if you pull down the headliner. You can do this pretty easy by just folding up the weather stripping around the sunroof, and pulling down on the headliner.
Align the shaved clip with the metal loop in the headliner. Push down from the inside of the headliner while you're pushing up on the bezel and everything should snap back into place. If done correctly, it'll look good as new, and wont be falling back down anytime soon.
Back to Top
|
Logged
2.9" pulley | 42# | 2.5" catless exhaust | Ingalls TD | B&M STS | 06Black tune | 14.1@102mph
stock pulley!
Ignorance is no excuse for stupidity
Autechre
Guest
Re: How To: Fix your sunroof bezel
«
Reply #1 on:
March 28, 2007, 10:31:48 PM »
HEY, WHERE'S MY PROPS ON STEP 3 SUCKA
Back to Top
|
Logged
streetracinazian313
Regular Members
Offline
Posts: 334
Re: How To: Fix your sunroof bezel
«
Reply #2 on:
May 22, 2007, 05:58:55 PM »
my actual button popped off one day
then i shoved it back in there and it was fine, now it's like tilted haha
Back to Top
|
Logged
braineater
Moderator
Senior Member
Offline
Posts: 1676
Re: How To: Fix your sunroof bezel
«
Reply #3 on:
September 05, 2007, 12:14:53 PM »
mine popped off yesterday when i hit a bump, i was going to follow this how-to right up till i read shaving stuff, f*** that, i will take it to the dealer when i get a chance.
Back to Top
|
Logged
07 ss/sc, G85, cold air intake, 60# injectors, 2.8 pulley,meth injection, colder plugs, torque dampener, custom tune
braineater's podcast
this link kills spam
mcphatty
El Presidente
Senior Member
Offline
Posts: 3066
Press the mcphatty button...
Re: How To: Fix your sunroof bezel
«
Reply #4 on:
September 05, 2007, 02:26:55 PM »
dealer
might
fix it.. this method will just ensure it stays there foreverrrrrrrrrrrrrrrrrrr
Back to Top
|
Logged
2.9" pulley | 42# | 2.5" catless exhaust | Ingalls TD | B&M STS | 06Black tune | 14.1@102mph
stock pulley!
Ignorance is no excuse for stupidity
toxicag
Senior Member
Offline
Posts: 700
Re: How To: Fix your sunroof bezel
«
Reply #5 on:
September 05, 2007, 02:51:23 PM »
if you say it like that you need to say it like the Sandlot Forrrrrrrrrrrevvvvvvvvvvvvverrrrrrrrr.........
hahaha
Back to Top
|
Logged
mcphatty
El Presidente
Senior Member
Offline
Posts: 3066
Press the mcphatty button...
Re: How To: Fix your sunroof bezel
«
Reply #6 on:
September 05, 2007, 04:11:21 PM »
well at least someone knew what i was getting at
Back to Top
|
Logged
2.9" pulley | 42# | 2.5" catless exhaust | Ingalls TD | B&M STS | 06Black tune | 14.1@102mph
stock pulley!
Ignorance is no excuse for stupidity
braineater
Moderator
Senior Member
Offline
Posts: 1676
Re: How To: Fix your sunroof bezel
«
Reply #7 on:
September 05, 2007, 08:50:52 PM »
oh i am sure they are good instructions, but i am also sure that i will f*** up and damage something, might as well let the dealer fix it, and of course they will fix it, its a lease.
Back to Top
|
Logged
07 ss/sc, G85, cold air intake, 60# injectors, 2.8 pulley,meth injection, colder plugs, torque dampener, custom tune
braineater's podcast
this link kills spam
braineater
Moderator
Senior Member
Offline
Posts: 1676
Re: How To: Fix your sunroof bezel
«
Reply #8 on:
September 08, 2007, 06:23:30 PM »
well this time when i put the bezel back on it cocked the button all sideways so its a trip to the dealership for me! and before anyone says that i can just fix it myself i will tell you that maybe YOU can fix it yourself but i cant, i suck at that kind of stuff, i can completely understand every line of instruction on a how to and still mess it up because my hands wont do what i tell them to.
Back to Top
|
Logged
07 ss/sc, G85, cold air intake, 60# injectors, 2.8 pulley,meth injection, colder plugs, torque dampener, custom tune
braineater's podcast
this link kills spam
Njv8813
Regular Members
Offline
Posts: 147
Re: How To: Fix your sunroof bezel
«
Reply #9 on:
April 16, 2009, 12:54:35 PM »
At one of the meets ur gonna have to show me this in person I'm kind of dumb like that LOL
Back to Top
|
Logged
shaved black redline, K&N, progress springs, hid's
mcphatty
El Presidente
Senior Member
Offline
Posts: 3066
Press the mcphatty button...
Re: How To: Fix your sunroof bezel
«
Reply #10 on:
April 16, 2009, 01:38:08 PM »
i put the pictures back up- didn't realize they weren't showing up until just now. let me know if you still need help.
Back to Top
|
Logged
2.9" pulley | 42# | 2.5" catless exhaust | Ingalls TD | B&M STS | 06Black tune | 14.1@102mph
stock pulley!
Ignorance is no excuse for stupidity
Njv8813
Regular Members
Offline
Posts: 147
Re: How To: Fix your sunroof bezel
«
Reply #11 on:
April 16, 2009, 01:42:44 PM »
Ok I'll try it and let u know how it goes LOL
Back to Top
|
Logged
shaved black redline, K&N, progress springs, hid's
ssyellow
Senior Member
Offline
Posts: 502
2006 Cobalt SS
Re: How To: Fix your sunroof bezel
«
Reply #12 on:
April 16, 2009, 02:01:44 PM »
o yay I thoght my computer was just stupid
Back to Top
|
Logged
braineater
Moderator
Senior Member
Offline
Posts: 1676
Re: How To: Fix your sunroof bezel
«
Reply #13 on:
April 16, 2009, 04:00:47 PM »
mine fell off again last fall, i meant to bring it to the dealership but didnt have time...
Back to Top
|
Logged
07 ss/sc, G85, cold air intake, 60# injectors, 2.8 pulley,meth injection, colder plugs, torque dampener, custom tune
braineater's podcast
this link kills spam
mcphatty
El Presidente
Senior Member
Offline
Posts: 3066
Press the mcphatty button...
Re: How To: Fix your sunroof bezel
«
Reply #14 on:
April 16, 2009, 04:05:30 PM »
mine still hasnt fallen since i did this "fix". you should have done it my way, jay
Back to Top
|
Logged
2.9" pulley | 42# | 2.5" catless exhaust | Ingalls TD | B&M STS | 06Black tune | 14.1@102mph
stock pulley!
Ignorance is no excuse for stupidity
twzted
Senior Member
Offline
Posts: 1419
So many mods, it got slower!
Re: How To: Fix your sunroof bezel
«
Reply #15 on:
April 16, 2009, 04:44:34 PM »
mine has never fallin off
Back to Top
|
Logged
06 Cobalt SS/SC, G85 pkg, Sunroof
Don't worry bout my mods
schembo2000
Gots my code air intake, yo
Senior Member
Offline
Posts: 2761
Re: How To: Fix your sunroof bezel
«
Reply #16 on:
April 17, 2009, 06:54:59 AM »
mine has never fallen off either
Back to Top
|
Logged
For Sale:
RSM 62mm throttle body, 17" enkei wheels w/tires
White 2003 Cavalier -
Weapon R Short Ram, polyurethane upper and lower engine mounts, Tein Basic Coilovers, O.E.M. Camber plates, O.E.M. Solid rear strut mounts, Vibrant front and rear strut tower bars, Powerslot rotors & Hawk pads, Russell stainless steel brake lines, 225/45/17 Bridgestone RE-01R (track) and Michilen Pilot Exalto PE2 215/45/17 (street)
Dyno vid
Dyno sheet
(Sold) 2002 Monte Carlo SS 3.8L V6 -
K&N Drop In air filter
Imperial Blue Metallic 2010 Cobalt SS
Turbocharged
cobaltgirl06
Guest
Re: How To: Fix your sunroof bezel
«
Reply #17 on:
April 17, 2009, 03:36:11 PM »
Thanks for the info mine, has been off for a year i will try it
Back to Top
|
Logged
alredline04
Senior Member
Offline
Posts: 2487
Zip tie conisour
Re: How To: Fix your sunroof bezel
«
Reply #18 on:
April 17, 2009, 03:41:58 PM »
mine neither....sunroofs are lame
Back to Top
|
Logged
Kraska Racing Development.
Jaemon52
Regular Members
Offline
Posts: 15
Re: How To: Fix your sunroof bezel
«
Reply #19 on:
March 22, 2010, 05:27:11 AM »
Luckily haven't experienced this problem yet
Back to Top
|
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Announcements
-----------------------------
=> Announcements
=> Front Page News
=> Introductions
-----------------------------
General
-----------------------------
=> General Ecotec Discussion
=> Motorcyle Forums
=> Off-Topic Discussion
=> Pictures & Videos
=> The Garage
=> How-To
=> Kill Or Be Killed
-----------------------------
Southeast Ecotec Enthusiasts
-----------------------------
=> Official Meets
===> Archived Meets
=====> 2009
=====> 2008
=====> 2007
=> Non-SEE Related Meets
-----------------------------
Modifications
-----------------------------
=> Interior
=> Exterior
=> Audio & Video
-----------------------------
Performance
-----------------------------
=> Engine
=> Suspension
=> Drivetrain
=> Wheels, Tires & Brakes
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Want to Buy
-----------------------------
Miscellaneous
-----------------------------
=> The Closet
=> Site Feedback
=> Signature Test
Powered by SMF 1.1.9
|
SMF © 2006-2009, Simple Machines LLC
XHTML
|
CSS
|
Aero79
design by
Bloc
Page created in 0.319 seconds with 19 queries.
Loading...